Read this section if you purchased the camera with the AF-P DX NIKKOR 70–300mm f/4.5–6.3G ED VR or AF-P DX NIKKOR 70–300mm f/4.5–6.3G ED lens kit available in some countries or regions. The parts of the lens are listed below.

These lenses are for use exclusively with DX format Nikon digital SLR cameras; SLR film cameras and D3-series, D2-series, D1-series, D700, D300-series, D200, D100, D90, D80, D70-series, D60, D50, D40-series, D7000, D5100, D5000, D3200, D3100, D3000 digital SLR cameras are not supported. When using these lenses with a D5, D4-series, D810-series, D800-series, Df, D750, D610, D600, D7200, D7100, D5500, D5300, or D3300, be sure the camera firmware has been updated to the latest version.

AF-P DX NIKKOR 70–300mm f/4.5–6.3G ED: Approx. 400 g (14.2 oz) Nikon reserves the right to change the appearance and specifications of the hardware and software described in this manual at any time and without prior notice. Updating the staple DX-format standard zoom, the AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR from Nikon offers a 27-82.5mm equivalent focal length range as well as an especially sleek form factor. Two aspherical elements are featured in the optical design, which help to control spherical aberrations and distortion in order to realize high sharpness. Manual-and-auto: automatic: manual-and-auto. Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens - The AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR is a 3.1x normal zoom lenses covering the 18-55mm range of focal lengths (effective angles of view equivalent to.

The Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR is the prefect lens to capture blur free images. With vibration reduction. Discover more here. May 14, 2016 This feature is not available right now. Please try again later. Jan 05, 2016  Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G VR. Announced Jan 5, 2016. Zoom lens Nikon F (DX). Super sharp even without stepping down apeture,blazingly fast viewfinder autofocus,instant overdrive manual focus and decently smooth barrel rotation. The drawback, there is a strong barrel distorsion at 18mm, so as Chromatic abbration, and little. New Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens Black (FREE DELIVERY + 1 YEAR AU WARRANTY) AMAZING Value, Brand New, 100% GENUINE. Pulse Stepping Motor AF System VR Image Stabilization Access Lens Settings in. In The Box Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens Black Original Packages.

Focus

The focus mode can be selected using camera controls (0Focus Mode). Autofocus and rangefinder features are supported at all focal lengths. When using this lens, ignore any sections of the camera manual listing autofocus and rangefinder restrictions for lenses with a maximum aperture slower than f/5.6.

Autofocus

Focus is adjusted automatically when the camera is in autofocus mode (0Focus Mode). The focus ring can also be used to focus the camera if the shutter-release button is kept pressed halfway (or if the AF-ON button is kept pressed); this is known as “autofocus with manual override” (M/A). Autofocus will resume when the shutter-release button is pressed halfway (or the AF-ON button is pressed) a second time. Note that touching the focus ring while autofocus is in effect will change the focus position.

Manual Focus

When the camera is in manual focus mode, focus can be adjusted by rotating the lens focus ring (0Manual Focus). When the camera is off or the standby timer has expired, the focus ring cannot be used to focus and rotating the zoom ring will change the focus position; before focusing, turn the camera on or press the shutter-release button to reactivate the standby timer.

Users of D5200 cameras should note that if the standby timer is allowed to expire, the focus position will change when the timer is restarted. Refocus before shooting. Longer standby times are recommended for manual focus and in other situations in which you may not release the shutter immediately after focusing.

Vibration Reduction (VR, AF-P DX NIKKOR 70–300mm f/4.5–6.3G ED VR Only)

Nikon Dx Af P Nikkor 18 55mm User Manual Pdf

When an AF-P DX NIKKOR 70–300mm f/4.5–6.3G ED VR is mounted on the camera, vibration reduction can be enabled or disabled using the Optical VR option in the shooting menu (0Optical VR). If On is selected, vibration reduction will take effect whenever the shutter-release button is pressed halfway. Vibration reduction reduces blur caused by camera shake, allowing shutter speeds up to 4.0 stops slower than would otherwise be the case, increasing the range of shutter speeds available. The effects of VR on shutter speed are measured according to Camera and Imaging Products Association (CIPA) standards; FX-format lenses are measured using FX-format digital SLR cameras, DX-format lenses using DX-format cameras. Zoom lenses are measured at maximum zoom.

Nikon Af-p Dx Nikkor 18-55mm Manual

Vibration Reduction

• When using vibration reduction, press the shutter-release button halfway and wait for the image in the viewfinder to stabilize before pressing the shutter-release button the rest of the way down.
• When vibration reduction is active, the image in the viewfinder may jiggle after the shutter is released. This does not indicate a malfunction.
• When the camera is panned, vibration reduction applies only to motion that is not part of the pan (if the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake), making it much easier to pan the camera smoothly in a wide arc.
• If the camera is equipped with a built-in flash, vibration reduction will be disabled while the flash charges.
• Vibration reduction is generally recommended when the camera is mounted on a tripod, although you may prefer to turn it off depending on shooting conditions and the type of tripod.
• Vibration reduction is recommended when the camera is mounted on a monopod.

Supplied Accessories

• LC-58 58 mm Snap-on Front Lens Cap
• Rear Lens Cap

Compatible Accessories

• 58 mm screw-on filters
• LF-4 Rear Lens Cap
• CL-1020 Lens Case

• HB-77 Bayonet Hood

  Align the lens hood mounting mark (●) with the lens hood alignment mark () as shown in Figure q and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark (—○).

  When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached. The hood can be reversed and mounted on the lens when not in use. When the hood is reversed, it can be attached and removed by rotating it while holding it near the lock mark (—○).

Specifications

Nikon reserves the right to change the appearance and specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

Read this section if you purchased the camera with the AF-P DX NIKKOR 18–55mm f/3.5–5.6G VR lens kit available in some countries or regions. The parts of the lens are listed below.

Nikon Dx Af P Nikkor 18 55mm User Manual Free

This retractable lens is for use exclusively with DX format Nikon digital SLR cameras; SLR film cameras and D3-series, D2-series, D1-series, D700, D300-series, D200, D100, D90, D80, D70-series, D60, D50, D40-series, D7000, D5100, D5000, D3200, D3100, D3000 digital SLR cameras are not supported. When using it with a D5, D4-series, D810-series, D800-series, Df, D750, D610, D600, D7200, D7100, D5500, D5300, or D3300, be sure the camera firmware has been updated to the latest version.

Focus

The focus mode can be selected using camera controls (0Focus Mode).

Autofocus

Focus is adjusted automatically when the camera is in autofocus mode (0Focus Mode). The focus ring can also be used to focus the camera if the shutter-release button is kept pressed halfway (or if the AF-ON button is kept pressed); this is known as “autofocus with manual override” (M/A). Autofocus will resume when the shutter-release button is pressed halfway (or the AF-ON button is pressed) a second time. Note that touching the focus ring while autofocus is in effect will change the focus position.

Manual Focus

When the camera is in manual focus mode, focus can be adjusted by rotating the lens focus ring (0Manual Focus). When the camera is off or the standby timer has expired, the focus ring cannot be used to focus and rotating the zoom ring will change the focus position; before focusing, turn the camera on or press the shutter-release button to reactivate the standby timer.

Nikon Dx Af P Nikkor 18 55mm User Manual Guide

Users of D5200 cameras should note that if the standby timer is allowed to expire, the focus position will change when the timer is restarted. Refocus before shooting. Longer standby times are recommended for manual focus and in other situations in which you may not release the shutter immediately after focusing.

Using the Built-in Flash

When using the built-in flash, be sure the subject is at a range of at least 0.6 m (2 ft) and remove lens hoods to prevent vignetting (shadows created where the end of the lens obscures the built-in flash).

Vignetting

When the lens is mounted on the following cameras, the built-in flash may be unable to light the entire subject at ranges less than those given below:

Nikon Dx Af P Nikkor 18 55mm User Manual 2016

Vibration Reduction (VR)

When an AF-P DX NIKKOR 18–55mm f/3.5–5.6G VR is mounted on the camera, vibration reduction can be enabled or disabled using the Optical VR option in the shooting menu (0Optical VR). If On is selected, vibration reduction will take effect whenever the shutter-release button is pressed halfway. Vibration reduction reduces blur caused by camera shake, allowing shutter speeds up to 4.0 stops slower than would otherwise be the case, increasing the range of shutter speeds available. The effects of VR on shutter speed are measured according to Camera and Imaging Products Association (CIPA) standards; FX-format lenses are measured using FX-format digital SLR cameras, DX-format lenses using DX-format cameras. Zoom lenses are measured at maximum zoom.

Vibration Reduction

• When using vibration reduction, press the shutter-release button halfway and wait for the image in the viewfinder to stabilize before pressing the shutter-release button the rest of the way down.
• When vibration reduction is active, the image in the viewfinder may jiggle after the shutter is released. This does not indicate a malfunction.
• When the camera is panned, vibration reduction applies only to motion that is not part of the pan (if the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake), making it much easier to pan the camera smoothly in a wide arc.
• If the camera is equipped with a built-in flash, vibration reduction will be disabled while the flash charges.
• Vibration reduction is generally recommended when the camera is mounted on a tripod, although you may prefer to turn it off depending on shooting conditions and the type of tripod.
• Vibration reduction is recommended when the camera is mounted on a monopod.

Supplied Accessories

• LC-55A 55 mm Snap-on Front Lens Cap
• Rear Lens Cap

Compatible Accessories

• 55 mm screw-on filters
• LF-4 Rear Lens Cap
• CL-0815 Lens Case

• HB-N106 Bayonet Hood

  Align the lens hood mounting mark (●) with the lens hood alignment mark () as shown in Figure q and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark (—○).

  When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached. The hood can be reversed and mounted on the lens when not in use.

Specifications

Nikon Af-p Dx Nikkor 18-55mm Manual Focus

Nikon reserves the right to change the appearance and specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.